Company News_News Center_Shenzhen Luen Fat Precision Technology Co., Ltd

Shenzhen New District investigated 6 black electroplating processing plants in June

Shenzhen New District investigated 6 black electroplating processing plants in June

Release time：

2019-03-15

Abstract:

The Shenzhen New District Urban Construction Bureau and the public security department have again seized two black electroplating processing plants in the Guanlan area, and this month, six black electroplating processing plants were seized. On the basis of the law enforcement month in April and May of this year, the law enforcement department of the New District Urban Construction Bureau summed up the experience, increased the enforcement of violations, and extended the environmental water law enforcement

View details

Poor plating solution

Release time：

2019-03-15

Abstract:

coating quality Most of the bad occurrences are plating conditions,Abnormal plating equipment or plating solution,and human negligence.It is often easier to find the cause to overcome when a bad situation occurs in the field,But it’s tricky after a period of plating..However Acid and gas in the future,Oxygen ,< /span>Moisture, etc.,Accelerate oxidative corrosion must also be noted.The following chapter will be Explain the cause of the poor plating and the countermeasures for improvement.

View details

Aerospace military product plating production line

Release time：

2019-03-15

Abstract:

Congratulations to our company on the development of the carbon fiber and cotton fiber line plating equipment production line for the aerospace military industry in 2009/12/08 and the School of Materials of Tianjin University. The trial production has been a complete success!

View details

Barrel plating concept

Release time：

2019-03-15

Abstract:

1概述滚镀适用于受形状、大小等因素影响无法或不宜装挂的小零件的电镀，它与早期小零件电镀采用挂镀或篮筐镀的方式相比，节省了劳动力，提高了劳动生产效率，而且镀件表面质量也大大提高。所以，滚镀的发明与应用在小零件电镀领域无疑有着非常积极的意义。滚镀早在20世纪20年代就已经在工业上得到应用。国内滚镀最早于20世纪50年代中后期出现在上海，机械化连续滚镀设备在20世纪60年代左右开始使用，但当时的设备仅仅

View details

Barrel plating classification

Release time：

2019-03-15

Abstract:

1 Overview
Scientifically classifying the type of barrel plating should be based on the shape and axial direction of the barrel used for barrel plating. The shape of the drum means that the shape of the drum is similar to what the object is. The axial direction of the drum refers to the relationship between the direction of the axis of rotation and the horizontal plane when the drum rotates. According to the difference between the two aspects of the drum, the common barrel plating methods in electroplating production are divided into three types: horizontal barrel plating, inclined barrel plating and vibration plating.

View details