The biggest feature of the roll-to-roll continuous plating production line is that the product finishes the surface treatment in the process of continuous plating through the equipment, achieves the surface treatment conditions required for production, and ensures the continuity and integrity of the strip, facilitating packaging and subsequent order. Processing. It has extremely high requirements on equipment. The most important thing is to ensure the stability and uniformity of the coating and ensure that the product is not deformed when the production line of tens of meters is passed.
The equipment is all managed by programmable controller (PLC), with temperature control, rectifier automatic control, liquid level control, automatic material addition and statistics, automatic PH value control, output statistics, automatic fault detection and display, equipment maintenance tips, etc. Features. The typical specifications and technical characteristics of the strip continuous automatic plating line are as follows: a. Feed line speed: 0~30m/min b. Plating speed: 0~20m/min. c. Product width: ≤80mm. d. Product thickness: 0.1mm~0.5mm. e. Equipment length: 10m~65m. f. Equipment width: 1.2m~4m. g. Control System: Automatic. h. Plating method: immersion plating, liquid level depth control selection plating, wheel type spot plating, wheel type strip selection plating, selective brush plating, Masking Belt selection strip coating. i. Electroplated metal: gold, silver, nickel, copper, tin, palladium, etc.